Brand: Windy Nation Inc
Perfect for RV’s, boats and other off grid applications
WindyNation takes the trouble and confusion out of adding a solar panel system to a battery bank with their 100% Complete Off-Grid Solar Kits!
Auxiliary power for RV’s and boats. Popular with commercial RV and marine retrofitters
Great for camping or remote cabins. Power devices in remote back country locations
Easy way to provide power for sheds, light poles and gates without the need for trenching and laying cables
Two or more panels can provide back-up power for critical appliances like a refrigerator during a power outage
Kit will produce an average of 1600 Watt Hours (Wh) or 135 Amp Hours (Ah) of charge per day (depends on sunlight availability)
(4 pcs) 100 Watt WindyNation 12 volt Polycrystalline WindyNation Solar Panel
Four panels are perfect for 12 or 24 Volt battery bank charging
Windynation’s UL 1703 Certified 100 Watt Solar Panels combine high efficiency with long term reliability and stability
Outstanding electrical performance under high temperature and low irradiance conditions
Note:Wiring diagrams for wiring the four solar panels in parallel (12V) and series (24V) are shown in the owners manual
(1 pc) 30 Amp Solar Charge Controller with LCD Display
WindyNation P30L PWM 30 Amp solar charge controller prevents battery from being overcharged and damaged by the solar panel
LCD digital display provides system information (amperage, voltage, temperature, etc.)
System settings are user adjustable by using the MODE and UP and DOWN buttons
Overload, short circuit, and reverse polarity protected. Battery temperature sensor (BTS) is included
(4 Sets) Solar Panel Mounting Bracket and Fastener Set
Includes sixteen anodized aluminum Z-brackets and sixteen sets of stainless steel fasteners
Quickly and easily mount the solar panel to a RV, boat or roof
Corrosion resistant materials (anodized aluminum and stainless steel)
Solar Panel Cable and MC4 Connectors
40 continuous feet of UL Listed 12 AWG solar extension cable (E331483)
One Pair of MC4 Connectors
The MC4 connectors allow for a quick and waterproof connection of the solar extension cable to the MC4 connectors attached to the back of the solar panel.
(Note: MC4 Connectors do not come pre-attached to cable. Cut cable to length and attach MC4 Connectors. The 12 AWG cable is used to connect the solar panels to the charge controller.)
MC4 Branch Connectors
Three Pairs of MC4 Branch Connectors
The MC4 branch connectors are used to wire the four solar panels in parallel for 12V battery charging.
Wiring diagram for both 12V and 24V are shown in the Owners manual
Comments are closed.